Feature Packaging - Nortel Meridian Meridian 1 Feature Description And Administration

Connected Line Identification Presentation and Restriction
(COLP and COLR)
The Connected Line Identification Restriction (COLR) supplementary
service takes precedence over the COLP supplementary service. The COLP
service can take precedence over COLR service if the calling user has an
override category.
The same Class of Service is used to control both Connected Line
Identification Restriction and Calling Line Identification Restriction (CLIR).
Thus, if a user has presentation restricted configured, their number is sent to
the other party for both incoming and outgoing calls with the presentation flag
set to restricted.
Coordinated Dialing Plan (CDP)
A Coordinated Dialing Plan (CDP) can be used to access an Australia ETSI
trunk. However, neither the CDP private plan nor the CDP numbering type is
supported. They get converted to unknown plan and type, respectively.
Virtual Network Services (VNS)
It is not possible to configure an Australia ETSI D-channel as a VNS
D-channel. However, the voice connection through the Public Exchange of a
VNS call may use a PRI/BRI COT or DID as a virtual TIE trunk.

Feature packaging

There are no new software packages required for this feature. However, the
following packages are necessary in order to connect the Meridian 1 over an
Australia ETSI PRI2/BRI interface to a Central Office.
For PRI2 connectivity:
• Integrated Services Digital Network (ISDN) package 145
• 2.0 Mb Primary Rate Interface (PRI2) package 154
• Overlap Signaling (OVLP) package 184
• International Primary Rate Access (IPRA) package 202
• Multi-Purpose Serial Data Link (MSDL) package 222
If the call is to interwork with any other trunk, the Universal ISDN Gateway
(UIGW) package 283 is required.
ISDN PRI Central Office Connectivity
International ISDN PRI Feature description and administration
Page 851 of 1814