Feature Implementation; Task Summary List - Nortel Meridian Meridian 1 Feature Description And Administration

Page 830 of 1814

Feature implementation

553-2901-301 Standard 9.00 January 2002
ISDN PRI Central Office Connectivity
• Meridian 1 Extended Peripheral Equipment (XPE) package 203
• Multi-Purpose Serial Data Link (MSDL) package 222, which requires
the Integrated Services Digital Network (ISDN) package 145
• New Format CDR (FCDR) package 234
For Basic Rate Interface trunk access the following packages are required
instead of the PRI-related packages:
• Basic Rate Interface (BRI) package 216
• Basic Rate Interface Trunk (BRIT) package 233
If the call is to interwork with any other trunk, the Universal ISDN Gateway
(UIGW) package 283 is required.
For nB+D, the International nB+D (INBD) package 255 is required.
The Overlap Signaling feature requires:
• Basic Routing (BRTE) package 14
• Network Class of Service (NCOS) package 32
• Basic Alternate Route Selection (BARS) package 57, Network Alternate
Route Selection (NARS) package 58, and/or Coordinated Dialing Plan
(CDP) package 59
• Flexible Numbering Plan (FNP) package 160
• Overlap Signaling (OVLP) package 184
Note: This package should not be enabled for the Philippines
• Basic Queuing (BQUE) package 28

Task summary list

The following is a summary of the tasks in this section:
1 LD 15 – Configure the Customer Data Block for Asia Pacific with
Calling Line Identification.
2 LD 17 – Configure the Asia Pacific D-channel.
3 LD 17 – Configure a Back-up D-Channel for Hong Kong.