Nortel Meridian Meridian 1 Feature Description And Administration page 990

Page 990 of 1814
RCAP
DV1I
DV1O
DV2I
DV2O
DV3I
DV3O
LD 10 – Configure QSIG Diversion Notification Class of Service, on analog (500/2500 type) sets.
Prompt Response
REQ: NEW
CHG
TYPE: 500
...
TN
l s c u
c u
...
DN xx...x yyy
...
553-2901-301 Standard 9.00 January 2002
ISDN QSIG Call Diversion Notification Enhancements
QSIG SS Call Diversion Notification remote capability.
Configure sending of QSIG Diversion Notification Information,
treatment of Rerouting request and coding of operations. If
coded as Object Identifier, the remote capability ends with 'O",
whereas for Integer Value, the remote capability ends with 'I'.
Only one remote capability is allowed. Refer to Table 1 for
further information.
Diversion information is sent to remote switch.
Diversion information is sent to remote switch.
Rerouting requests from remote switch are processed.
Rerouting requests from remote switch are processed.
Diversion information is sent to remote switch. Rerouting
requests from remote switch are processed.
Diversion information is sent to remote switch.
Rerouting requests from remote switch are processed.
Precede with 'X' to remove capability, but do not specify the
coding type. For example, XDV3 or XDV1 (and not XDV3I or
XDV1O).
Description
Add new data.
Change existing data.
Set type.
Terminal Number, for Options 51C-81C.
l = loop, s = shelf, c = card, u = unit.
Terminal Number for Option 11C.
c = card, u = unit.
Directory Number and Calling Line Identification entry (yyy
range is (0) - value entered for SIZE prompt in LD 15 minus
one).