Nortel Meridian Meridian 1 Feature Description And Administration page 939

Feature implementation
Task summary list
LD 17 – Assign Configuration Record.
Prompt Response
REQ CHG
TYPE ADAN
- ADAN CHG DCH x
...
- - IFC ISIG
ESIG
...
TIMR (NO) YES
T310 110 - (120)
• 2.0 Mb Primary Rate Access (PRI2) package 154;
• Overlap Signaling (OVLP) package 184;
• International Primary Rate Access (IPRA) package 202;
• ISDN QSIG Basic Call (QSIG) is package 263.
The following is a summary of the tasks in this section:
1 LD 17 – Assign Configuration Record.
2 LD 16 – Define the Route Data Block.
3 LD 97 – System Configuration.
Description
Change.
Action Device and Number.
Change input/output device. x = 0-63
Interface ID for ISO QSIG download table.
Interface ID for ETSI QSIG download table.
NO = skip timer prompt.
YES = change timer value.
The timer is used to define how long Meridian 1 can wait for
the response message when the QSIG outgoing call is in
an outgoing call proceeding state.
International ISDN PRI Feature description and administration
ISDN QSIG Basic Call Page 939 of 1814