Feature Interactions; Feature Packaging; Feature Implementation; Task Summary List - Nortel Meridian Meridian 1 Feature Description And Administration

Page 862 of 1814

Feature interactions

Feature packaging

Feature implementation

553-2901-301 Standard 9.00 January 2002
ISDN PRI Central Office Connectivity
The supplementary service control messages not relating to a call are not
supported.
The Meridian 1 does not send the High Layer Compatibility Information
Element in the SETUP message to the AXE-10, nor does it send the Restart
Request and Restart Global Call States.
Overlap Receiving is possible only if the AXE-10 conforms to the guidelines
contained in CCITT's preliminary Q.931 section 5.0.
There are no feature interactions specified for this feature.
To support all of the call services, the following packages must be equipped:
• Digit Display (DDSP) package 19;
• Integrated Services Digital Network (ISDN) package 145;
• 2.0 Mb Primary Rate Interface (PRI2) package 154;
• Flexible Numbering Plan (FLEN) package 160;
• Overlap Signaling (OVLP) package 184; and
• International Primary Rate Access (IPRA) package 202.

Task summary list

The following is a summary of the tasks in this section:
1 LD 17 – Define system support for the AXE-10 Australia connectivity.
2 LD 16 – Configure the routes for the AXE-10 Australia connectivity.
The following procedures assume that a D-channel has been configured.
Refer to the Data Administration chapter overlay procedures, page 830.