Software Release ID
Contents
Feature description
The following are the topics in this section:
Feature description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1577
Operating parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1578
Feature interactions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1578
Feature packaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1578
Feature implementation . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1578
Task summary list . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1578
Feature operation . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1579
Software Release ID uses the D-channel connection of your switch to identify
the software release of an adjoining switch. This feature identifies the
software release of the NRAG, NACD, NMS, and NCRD features. The
software release ID can be requested for all direct connections to the
Meridian 1. However, the Software Release ID cannot be obtained for
switches in a tandem configuration. The information provided by the
Software Release ID depends on the interfacing switches. That is, a Meridian
1 switch provides an X11 release number and a DMS-100 switch provides a
BCS number.
Note: If the interface is changed, the release ID is also changed. The
release ID must then be reconfigured.
International ISDN PRI Feature description and administration
Page 1577 of 1814