Nortel Meridian Meridian 1 Feature Description And Administration page 910

Page 910 of 1814
- CPFXS (YES) NO
- - HNTN 0-9999
HLCL 0-9999
ADDP (NO)
YES
553-2901-301 Standard 9.00 January 2002
ISDN PRI Central Office Connectivity
Customer-defined Prefixes option. This prompt is added as
one of the sub-prompts of ISDN = YES. It is added at the
end of the ISDN sub-prompts.
If CPFXS = YES, when constructing the Calling or
Connected Line Identification, the prefixes are retrieved
from the Customer Data Block via the PFX1 and PFX2
prompts in LD 15, as is currently done. This is the default
response.
If CPFXS = NO, when constructing the Calling or
Connected Line Identification, the prefixes are retrieved
from the Route Data Block via the HNTN and HLCL
prompts in LD 16.
Home National Number. This number is similar to the PFX1
number prompted in LD 15. It is added to this overlay so
that this prefix can be configured on a route basis as
required in some countries (e.g., Italy). As is the case with
PFX1, the HNTN prefix can be from one-to-four digits long.
This prompt is displayed only if CPFXS = NO.
If only a <CR> is entered, this prompt keeps its previous
configuration. If no value was configured previously, no
value will be configured.
Enter X to delete the digits.
Home Location Number. This number is similar to PFX2
number prompted in LD 15. It is added to this overlay so
that this prefix can be configured on a route basis as
required in some countries (e.g., Italy). As is the case with
PFX2, the HLCL prefix can be from one-to-four digits long.
This prompt is displayed only if CPFXS = NO.
If only a <CR> is entered, this prompt keeps its previous
configuration. If no value was configured previously, no
value will be configured.
Enter X to delete the digits.
If ADDP = NO, the Calling or Connected Party Number
displayed is not modified.
If ADDP = YES, the prefixes 0 (national) or 00
(international) are added to the Calling Party Number if the
Type of Number (TON) is public.