Page 1228 of 1814
...
CLS
VMA
...
KEY
xx ACD yyyy 0-N/D zzzz
xx SCN yyyy (ccc or D).
xx MSB
xx NRD
xx TRN
553-2901-301 Standard 9.00 January 2002
MCDN End to End Transparency
Allow voice messaging.
xx = key number
ACD key, where:
xx = key number (must be key 0).
yyyy = ACD DN or Message Center DN.
0-N = CLID entry, with N = CLID SIZE-1 (SIZE
defined in LD 15).
D = CLID entry, Search for a CLID entry from key 0
upwards, to find a DN key. the found CLID is used
as the CLID entry for the active DN key.
zzzz = ACD agent's position ID.
Please refer to the note at the top of LD 11 on
assigning a CLID entry to an ACD set.
Single Call Non-Ringing DN where:
yyyy = DN
ccc = CLID entry of (0)-N, where N = the value
entered at the SIZE prompt in LD 15 minus 1.
D = the character D may be entered to search a
CLID entry from key 0 and up to find a DN key. The
CLID associated with the found DN key will then be
used.
The DN can be up to 4 digits, up to 7 digits with
Directory Number Expansion (DNXP) package 150.
Once the SCN key has been defined, MARO is
prompted.
Make Set Busy key.
Not Ready key.
Call Transfer key.