Nortel Meridian Meridian 1 Feature Description And Administration page 1688

Page 1688 of 1814
PRID 2
...
LD 27 – Configure an ISDN BRI terminal.
Prompt Response
REQ NEW
TYPE TSP
DSL lll s c dsl#
c dsl#
USID (0)-15
MPHC NO
SPID aaa...a <cr>
Xaaa...a
DN xxxx (0)-N
CT VCE DTA
...
553-2901-301 Standard 9.00 January 2002
ISDN BRI features
Protocol Identification. Enter 2 for ETSI.
Description
Add new data.
Terminal Service Profile.
DSL address for Options 51C, 61C, 81C (as already
entered in step 1).
DSL address, for Option 11C (as already entered in
step 1)
User service identifier.
0 = default TSP.
This TSP is not configured for a Meridian 1 Packet
Handler.
Service profile ID
aaa...a = any combination of 1-20 alphanumeric
characters.
<cr> = Stops this prompt from being displayed again. A
maximum of 8 valid SPIDs per TSP are allowed.
Xaaa...a removes the specified SPID.
This prompt appears only if USID = 1-15. It repeats until
<cr> is entered, but only up to 8 SPIDs may be entered.
This SPID must be entered in the initializing terminal to
associate the terminal with a USID.
xxxx = DN to be associated with the TSP.
(0)-N = CLID entry, with N = CLID SIZE-1 (SIZE defined
in LD 15).
Call type (enter VCE for voice or DTA for data).