Duplex; 1-Sided → 2-Sided - Ricoh FT7950 Operating Instructions Manual

Ricoh printers operating instructions
Table of Contents

Advertisement

DUPLEX

This function copies originals on both sides
of paper.
You can run the Duplex function in the fol-
lowing two modes:
1 Sided→ → → → → 2 Sided
This mode makes two-sided copies from
one-sided originals.
2 Sided→ → → → → 2 Sided
This mode makes two-sided copies from
two-sided originals.
Limitation
You cannot use the following copy paper
in this function:
• Paper smaller than A5
both sides of A5 paper), or 5
in inch version(you can copy both sides
" × 8
1 / 2
1 / 2
of 5
"
• Translucent paper
• Adhesive labels
• OHP transparencies
• Post cards
You cannot use the bypass tray.
Note
You can copy on both sides of paper with
sizes of 64 - 104 g/m
"1-Sided→2-Sided" is enabled as the ba-
sic display at the factory. You can change
this setting. See ⇒ P.96 "Default Setting."
You can specify whether 1 Sided→2 Sided
or 2 Sided→2 Sided is to be selected by
default when you select Duplex. See ⇒
P.99 "Duplex mode priority setting."
Pressing [Duplex/Series Copies] once
when 1-Sided→2-Sided is selected turns
on 1 Sided→1 Sided.
1 Sided→ → → → → 2 Sided
This mode makes two-sided copies from one-
sided originals.
(you can copy
K
" × 8
1 / 2
1 / 2
paper)
K
2
(17 - 27 lb).
Note
Specify the odd or even number of origi-
nals when using the 1-Sided→ → → → → 2-Sided
mode. If you do not know the number of
"
originals, select [Autocount] and have the
document feeder count the number of origi-
nals.
A right margin of 5 mm(0.2") is set on the
backside automatically. You can change
this margin. See ⇒ P.99 "Margin Auto
shift."
When Front Cover and Front/Back Covers
are selected, the front and back covers are
copied on one side of paper, respectively.
Orientations of originals and
copy results
Set portrait originals in the
tion
and
the
(landscape) direction. The up-down re-
L
lationship will be reversed on the front and
back pages of 2-sided paper if a portrait origi-
nal is set in the landscape orientation or a land-
scape original is set in the portrait orientation.
Original orientation Orientation
K
K
L
L
DUPLEX
(portrait) direc-
K
landscape
originals
K
L
L
K
in
Result
47

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ft7970Ft7960

Table of Contents