Omron E5EK - MANUAL 2 User Manual page 99

CHAPTER 5 PARAMETERS
Calibration Mode
The parameters in this mode can be used only when the security" parameter (pro
tect mode) is set to 0". When selecting this mode for the first time after the E5EK
DRT has left the factory, return the security" parameter to 0".
This mode contains the parameters for user calibration of inputs. Only parameters
relating to input types specified in the input type" parameter (setup mode) can be
used.
To select this mode when in the levels 0 to 2, setup, expansion and option modes, press
the key for 1 second minimum. The display changes to the menu display. If you
select [ ] using the key then press the key for 1 second minimum,
the controller enters the calibration mode.
For details on parameters in the calibration mode, see Chapter 7 Calibration.
5–42