Omron E5EK - MANUAL 2 User Manual page 85

CHAPTER 5 PARAMETERS
Setup Mode
Auxiliary output 1 assignment
Auxiliary output 2 assignment
Assigns output functions to either of auxiliary output 1 or 2.
The following eight output functions can be assigned as outputs:
Function
Control output (heat) and control output (cool) cannot be assigned as outputs.
Error 3 can be assigned only when the remote SP function is enabled.
When the output function assigned to auxiliary output 1 or auxliary output 2 is ON,
the SUB1" or SUB2" LED lights.
Defaults: Auxiliary output 1"= [
Comment
F Related article
3.3 Setting Output Specifications (page 3 7)
F Related parameter
See
Alarm related parameter
LBA detection time" (level 2 mode)
5–28
Alarms 1 to 3, HBA, LBA, Error 1 (input error), Error 2 (A/D converter error),
and Error 3 (remote SP input error).
Symbol
Function Alarm 1 Alarm 2 Alarm 3 HBA LBA Error 1
], Auxiliary output 2"= [
Error 2 Error 3
]