Omron E5EK - MANUAL 2 User Manual page 11

+ About the displays
' No.1 display
' No.2 display
' Operation
indicators
' MS/NS indicators
+ How to use keys
key
'
A/M
key
'
key
'
Displays the process value or parameter symbols.
Displays the set point, manipulated variable or parameter settings.
OUT1 : Lits when the pulse output function assigned to control
output 1" is ON.
OUT2 : Lits when the pulse output function assigned to control out
put 2" is ON.
SUB1 : Lits when the output function assigned to auxiliary output
1" is ON.
SUB2 : Lits when the output function assigned to auxiliary
output 2" is ON.
MANU : Lits in the manual operation mode.
STOP : Lits when operation has stopped.
RMT : Lits during remote operation.
RSP : Lits during remote SP operation.
AT : Flashes during auto tuning.
Indicates the CompoBus/D (DeviceNet) status.
For details on indicated statuses, see Chapter 8, 8.1 Initial Checks." (page
8 2).
The following describes basic key operations.
Each press of this key switches between the auto and manual operations.
The functions of this key change according to how long it is pressed. If the
key is pressed for less than one second, the parameters are switched. If the
key is pressed for one second or more, the menu display appears. In key
operations from here on, "press the key" refers to pressing the key for less
than one second.
For details on parameter switching and menu display items, see pages 1 7
and 1 8.
Each press of the key increments or advances the values or settings
on the No.2 display, while each press of the
the values or settings on the No.2 display.
Functions vary, for example, when the
neously with key, or a key is held down continuously. For details, see
page 1 8. Also, chapters 3 and 4 describe examples using various key com
binations.
key decrements or returns
key is held down simulta
A/M
1–3