Omron E5EK - MANUAL 2 User Manual page 65

CHAPTER 5 PARAMETERS
Level 0 Mode
Remote SP monitor
Monitors remote SP in the local SP mode.
Function
Remote SP lower limit to Remote SP upper limit
Monitor
F Related article
4.2 Operating Condition Restrictions/SP ramp (page 4 5)
F Related parameters
See
SP mode" (level 2 mode)
Remote SP enable" Remote SP lower limit" Remote SP upper limit" (option
mode)
Set point during SP ramp
Monitors the set point during SP ramp
Matches the set point of the PV/SP" parameter when the set point is not during SP
ramp.
Function
Local SP : Local SP setting lower limit to local SP setting upper limit
Remote SP : Remote SP lower limit to remote SP upper limit
Monitor
F Related article
4.2 Operating Condition Restriction/SP ramp (page 4 5)
F Related parameters
See
PV/SP" (level 0 mode)
SP ramp time unit" SP ramp set value" (level 2 mode)
SP setting upper limit" SP setting lower limit" (expansion mode)
SP mode" (level 2 mode)
Remote SP enable" Remote SP upper limit" Remote SP lower limit" (option
mode)
5–8
Conditions of Use
Monitor Range
Conditions of Use
Moniter Range
The controller must be in the local SP
mode with the remote SP function
enabled.
Unit
EU
The remote SP function must be enabled
or the SP ramp function must be enabled.
Unit
EU
EU