Omron E5EK - MANUAL 2 User Manual page 95

CHAPTER 5 PARAMETERS
Option Mode
Operation at communication error
Specifies operation when a communication error occurs.
To continue operations other than communication functions, select continue". To
stop operations, select stop".
Function
Comment
F Related article
6.3 Setting the Communications Conditions (page 6 6)
F Related parameter
See
Remote/Local" (level 2 mode)
to
to
The communication data types (16 types each for read and write) that have been
assigned to these parameters are sent and received from the CompoBus/D (Device
Net) master.
The assigned data type settings are successively sent and received via remote I/O
Function
channels.
Communication data type
For details on parameters, operation instructions and statuses that are assigned as
communication data, see Chapter 6 Using CompoBus/D (DeviceNet), 6.4 Data
Assignments/Data Type List (page 6 9).
Comment
Set [
assigned.
Default
F Related article
6.4 Data Assignments (page 6 8)
F Related parameter
Remote/Local" (level 2 mode)
See
5–38
Setting Range
[ ] : Continue/[ ] : Stop
Read data assignment 1 to 16
Write data assignment 1 to 16
] (not assigned") to parameters to which communication data is not
Parameter
Read data assignment 1
Read data assignment 2
Read data assignment 3
Read data assignment 4
to
Read data assignment 16
Write data assignment 1
Write data assignment 2
Write data assignment 3
Write data assignment 4
Write data assignment 5
to
Write data assignment 16
Unit Default
None
Assignment Data
Process value
Manipulated variable (heat)
Status A
Not assigned
Set point
Alarm value 1
Alarm value 2
Operation instruction
Not assigned