Omron E5EK - MANUAL 2 User Manual page 16

CHAPTER 1 INTRODUCTION
' Protect mode
' Manual mode
+ Selecting
parameters
+ Fixing settings
1–8
To set the controller to the protect mode or to return to the level 0 mode
from the protect mode, press the
mun simultaneously.
To set the controller to the manual mode, press the
minimun in the level 0 to 2 mode. To return to the level 0 mode from the
manual mode, press the
When not in the manual mode, each press of the
parameter.
If you press the key when at the final parameter, the display returns
to the first parameter.
Parameter
Parameter
1
If you press the key when at the final parameter, the display returns
to the first parameter.
When you have changed a parameter setting, specify the parameter
using the or keys, and either leave the setting for at least two
seconds or press the
When another mode is selected, the content of the parameters before the
mode was selected is fixed.
When turning the power OFF, you must first fix the settings and param
eter contents (by pressing the
settings and parameter contents are sometimes not changed by merely
pressing the or
key and
A/M
key for 1 second minimum.
A/M
Parameter
2 3
key. This fixes the setting.
key or selecting another mode). The
keys.
key for 1 second mini
key for 1 second
A/M
key switches the
Parameter
n