CHAPTER 5 PARAMETERS
Level 1 Mode
Heater burnout
Outputs the heater burnout alarm when the heater current value falls below this
parameter setting.
When the set value is 0.0", the heater burnout alarm is OFF". When the set value
Function
is 50.0", the heater burnout alarm is ON".
Comment
F Related article
4.4 How to Use the Heater Burnout Alarm (page 4 9)
F Related parameters
See
Heater current monitor" (level 1 mode) HBA latch" (option mode)
5–16
Setting Range
Unit
0.0 to 50.0
A
Conditions of Use
The HBA output function must be
assigned.
Default
0.0