Power-On Tone; Control Tone - Kenwood NX-240 Function Reference

6 SOUND
6.1 Tones that Sound When a User Operates the Transceiver or When the Transceiver Status Is Changed

Power-on Tone

A Power-on Tone sounds from the transceiver when the transceiver is turned ON.
For Portable, whether to emit the Power-on Tone can be configured using KPG-169D/ KPG-170D.
For Mobile, the volume level of Power-on Tone can be configure using KPG-175D. (Refer to
of Various Tones (Tone Volume) on page
Function
Power-on Tone
Configuration using KPG-169D/ KPG-170D
Configuring whether to emit the Power-on Tone from the transceiver (
Tone)
Configuration using KPG-175D
Configuring the volume level of Power-on Tone (

Control Tone

A Control Tone sounds when a function is activated by a user operating the transceiver.
For Portable, whether to emit the Control Tone can be configured using KPG-169D/ KPG-170D.
For Mobile, the volume level of Control Tone can be configured by using KPG-175D. (Refer to
Level of Various Tones (Tone Volume) on page
Function
Tone A
Tone B
Error Tone
Priority-channel Stop Tone
Analog Zone Type Tone
Digital Zone Type Tone
Zone Indicator Tone
(Portable only)
Busy Tone
FleetSync Side Tone
FleetSync Individual Tone
FleetSync Group Tone
FUNC (K)/Ver 1.20
35.)
Table 6-2 Power-on Tone
This tone sounds from the transceiver when the transceiver is turned ON.
See
35.)
Table 6-3 Control Tone
This tone sounds from the transceiver when a function is enabled by pressing a key.
This tone sounds from the transceiver when the transceiver exits from each mode.
This tone sounds from the transceiver when a function is disabled by pressing a key.
This tone sounds from the transceiver when the operation activated by pressing a key is denied.
This tone sounds from the transceiver when the scan is paused on a Priority-channel.
This tone sounds from the transceiver when an analog zone is selected.
This tone sounds from the transceiver when an NXDN digital zone is selected.
This tone sounds from the transceiver when the Zone-channel is changed.
This tone sounds from the transceiver if the transceiver cannot send the GPS data or Status Message
since the channel is busy.
This tone also sounds from the transceiver if no transmit frequency is configured when the transceiver
sends the GPS data or Status Message on a Data Zone-Channel.
This tone sounds from the transceiver when the transceiver transmits a FleetSync PTT ID (BOT).
This tone sounds from the transceiver when the transceiver transmits a FleetSync Individual Call.
This tone sounds from the transceiver when the transceiver transmits a FleetSync Group Call.
Description
See Edit > Optional Features > Common 2 >
Edit > Optional Features > Common 2 > Tone Volume)
Description
Configuring the Volume Level
Configuring the Volume
CONTENTS INDEX 27