Table of Contents
Advertisement
8 NXDN CONVENTIONAL SYSTEM
8.1 Initiating Voice Communications (Basic Transmission and Reception)
Receiving
Received audio sounds from the speaker if the transceiver receives digital signals, and the frequency matches the
frequency of the channel on which the transceiver has waited for or the NXDN ID matches the NXDN ID preconfigured for
the transceiver. When a signaling (RAN) is used, communications are possible if the received RAN code matches the RAN
code which the transceiver waits for.
Auto Reset Timer
Auto Reset Timer is the amount of time from when the received Unit ID or Group ID matches the Unit ID or Group ID
preconfigured for the transceiver until blinking of the LED and emission of an Alert Tone will automatically be reset.
Auto Reset Timer can be configured by using KPG-169D/ KPG-170D/ KPG-175D.
Configuration
Off
Auto Reset Timer will not be activated.
1 s to 300 s
After the configured time elapses, the matching state of the Unit ID or Group ID is automatically reset.
Note
• For Portable, Auto Reset Timer is canceled if the channel is changed or any PF key is used while the Auto Reset Timer is counting
down. The Alert Tone stops sounding and the blinking LED is turned Off at this time.
• For Mobile, Auto Reset Time is canceled if any PF key other than the Emergency, Volume Up, Volume Down, and LED Brightness
key is used while the Auto Reset Timer is counting down. The Alert Tone stops sounding and the blinking LED is turned Off at this time.
Configuration using KPG-169D/ KPG-170D/ KPG-175D
Configuring the Auto Reset Timer (
Selective Call Alert LED
Selective Call Alert LED is the function to make the LED blink orange or blue when the transceiver receives a call using an
NXDN ID.
A user can notice by the LED that the transceiver is receiving a call.
Note
The color of the blinking LED can be configured by types of calls by using KPG-169D/ KPG-170D/ KPG-175D.
Configuration using KPG-169D/ KPG-170D/ KPG-175D
•
Configuring the Selective Call Alert LED (
•
Configuring the Alert LED Color (
FUNC (K)/Ver 1.20
Table 8-1 Auto Reset Timer
Edit > NXDN > General 2 > Auto Reset)
See
See
Edit > NXDN > Conventional)
See
Edit > NXDN > Conventional > Alert LED Color)
Description
CONTENTS
INDEX
49
Advertisement
Table of Contents
