Table of Contents
Advertisement
5 INDICATION AND DISPLAY
5.4 LED Display
Indication on the LED Display
Supported Models: Mobile
Alphanumeric characters and symbols appear on the LED display as below according to the transceiver status:
Status
Displaying the channel number
• Communicating with a PC
• Receiving data in Clone Mode (Target Radio)
Scanning
Sending data in Clone Mode (Source Radio)
Clone behavior completed (Source Radio)
• Error occurred during Clone behavior (Target
Radio)
• No response received from the receiving
transceiver when sending a Status Message
• No data written in the transceiver
• Kill state
FUNC (K)/Ver 1.20
Table 5-1 Indication on the LED Display
Indication
Remarks
Refer to
3.5 Changing the Channel on page
Refer to
21.1 Copying the Configuration Data to
Another Transceiver (Clone Mode) on page
Refer to
16 SCAN on page
172.
Refer to
21.1 Copying the Configuration Data to
Another Transceiver (Clone Mode) on page
Refer to
21.1 Copying the Configuration Data to
Another Transceiver (Clone Mode) on page
Refer to
21.1 Copying the Configuration Data to
Another Transceiver (Clone Mode) on page
NXDN:
Refer to
8.7 Sending a Status Message (Status
Call) on page
72.
FleetSync:
Refer to
10.6 Sending a Status Message (Status
Call) on page
118.
Refer to
Turning the Transceiver ON on page
NXDN:
Refer to
8.11 Disabling the Transceiver Capability
by Remote Control (Stun/ Kill) on page
FleetSync:
Refer to
10.8 Disabling the Transceiver Capability
by Remote Control (Stun/ Kill) on page
CONTENTS
12.
195.
195.
195.
195.
9.
85.
125.
INDEX
21
Advertisement
Table of Contents
