Table of Contents
Advertisement
8 NXDN CONVENTIONAL SYSTEM
8.9 Site Roaming
•
If "Site Roaming with RAN" is configured for Zone Type:
If the received RAN code matches that preconfigured for the channel, the transceiver unmutes the speaker and
the channel will be the Revert Channel.
If the received RAN code does not match the RAN code preconfigured for the channel or if no RAN code is
configured for the channel, the transceiver migrates to the channel having the second strongest RSSI level (for
example, Channel 2) and examines whether the received RAN code matches the RAN code preconfigured for the
channel. If the received RAN code matches the RAN Code preconfigured for the channel, the transceiver
unmutes the speaker and the channel becomes a Revert Channel.
F: While the received RAN code matches the RAN code preconfigured for the channel, the transceiver will remain on the
channel and will not resume Site Roaming.
G: If the received signal disappear or the received RAN code does not match that preconfigured for the channel, Dropout
Delay Time will be activated.
H: After the time configured for the Dropout Delay Time elapses, the transceiver resumes Site Roaming.
Note
• For Mobile, the Scan Add function cannot be used on a channel in the zone configured as Site Roaming or Site Roaming with RAN.
• The following functions cannot be used in a zone configured as Site Roaming or Site Roaming with RAN.
• Data Zone-Channel (Analog)
• Data Zone-Channel (NXDN)
• Direct Zone-Channel key (Mobile only)
• Scan key
• The number of a zone configured as Site Roaming or Site Roaming with RAN cannot be configured for the following functions.
• Data Zone-Channel (Analog)
• Data Zone-Channel (NXDN)
• Priority Zone-Channel (Analog)
• Priority Zone-Channel (NXDN)
• Emergency Zone-Channel (Analog)
• Emergency Zone-Channel (NXDN)
• If the transceiver initiates an Emergency Call in the zone configured as Site Roaming or Site Roaming with RAN, the transceiver
transmits on the Revert Channel regardless of the configuration for Emergency Zone-Channel Type (Selected or Fixed).
• The Revert Channel used for Site Roaming is not retained when the zone is changed.
• If the zone configured as Site Roaming or Site Roaming with RAN is selected while the transceiver is scanning, the transceiver
resumes Site Roaming.
Configuration using KPG-169D/ KPG-170D/ KPG-175D
Configuring the Zone Type (
FUNC (K)/Ver 1.20
Edit > Zone Information)
See
CONTENTS
INDEX
78
Advertisement
Table of Contents
