Kenwood NX-240 Function Reference page 131

9 ANALOG CONVENTIONAL SYSTEM
9.9 Improving the Sound Quality for Transmitting and Receiving (Compander)/ 9.10 Disabling the Transceiver Capability by Remote
9.9 Improving the Sound Quality for Transmitting and Receiving
(Compander)
Compander is a compound term made from "COMpressor" and "exPANDER", and is a function designed to improve sound
quality.
This function is used to improve the S/N ratio of voice communications by compressing the audio at the transmitting end of
the communication path and expanding the audio at the receiving end of the path.
The transmitting party and the receiving party must have the same configuration to use this function.
Configuration using KPG-169D/ KPG-170D/ KPG-175D
Configuring the Compander to be enabled or disabled for each channel (
Page 2)
9.10 Disabling the Transceiver Capability by Remote Control
(Stun)
By using the DTMF code, FleetSync status, or MDC-1200 message, it is available to remotely disable the transceiver
capability. This function allows a system administrator to remotely disable the transceiver, for instance, if the transceiver is
lost.
The transceiver which has been disabled by this function can be enabled to be usable again by remote control from an
external device using radio communication.
Refer to the following for details of the Stun (or Kill) function for each format:
• FleetSync
10.8 Disabling the Transceiver Capability by Remote Control (Stun/ Kill) on page 125
• MDC-1200
11.4 Disabling the Transceiver Capability by Remote Control (Stun) on page 131
• DTMF
12.7 Disabling the Transceiver Capability by Remote Control (Stun) on page 138
FUNC (K)/Ver 1.20
See Edit > Zone Information > Channel Edit >
CONTENTS INDEX 106