Kenwood NX-240 Function Reference page 190

15 COMMUNICATION SECURITY
15.1 Built-in Voice Scrambler (Analog)
Operating the Transceiver
1
Press and hold the
The transceiver enters Scrambler/ Encryption Code Mode. "co" appears on the LED display for 1 sec and then the Scrambler
Code configured for the selected channel appears. The right dot blinks at this time.
2
Select a Scrambler Code by pressing the
3
Press the [S] key.
The transceiver exits Scrambler/ Encryption Code Mode and the selected Scrambler Code is configured for the transceiver.
Configuration using KPG-169D/ KPG-170D
Configuring the Scrambler Code (
Optional Features > Scrambler)
Configuration using KPG-175D
• Assigning functions to the PF keys (
• Configuring the Scrambler Code (
Optional Features > Scrambler)
Key Operations in Scrambler/ Encryption Code Mode
Supported Models: Mobile
If the [ ]/ [ ] key or [ ]/ [ ] key to which Zone Up/ Zone Down or Channel Up/ Channel Down is assigned is used
while the transceiver is in Scrambler/ Encryption Code Mode, the transceiver exits Scrambler/ Encryption Code Mode and
each of the functions is activated.
If the [ ]/ [ ] key or [ ]/ [ ] key to which Volume Up/ Volume Down or LED Brightness is assigned is used while the
transceiver is in Scrambler/ Encryption Code Mode, the transceiver remains in Scrambler/ Encryption Code Mode and
each of the functions is activated.
If one of the PF keys to which the following functions are assigned is used while the transceiver is in Scrambler/ Encryption
Code Mode, the transceiver remains in Scrambler/ Encryption Code Mode and each of the functions is activated.
• Squelch Off
• Squelch Off Momentary
• Monitor
• Monitor Momentary
FUNC (K)/Ver 1.20
Scrambler/ Encryption Code
[<B]
See Edit > Zone Information > Channel Edit > Page 2 > Scrambler Setting, Edit >
See Edit > Key Assignment)
See Edit > Zone Information > Channel Edit > Page 2 > Scrambler Setting, Edit >
key.
or [C>] key.
CONTENTS INDEX 165