Kenwood NX-240 Function Reference page 65

6 SOUND
6.9 Switching the Internal/ External Speaker (External Speaker)
6.9 Switching the Internal/ External Speaker (External Speaker)
Supported Models: Mobile
External Speaker is the function to switch the speaker to be used between the external speaker connected to the D-sub
connector of the transceiver and the internal speaker of the transceiver.
External Speaker can be enabled or disabled by pressing the External Speaker key.
The audio sounds from the external speaker if External Speaker is enabled. The audio sounds from the internal speaker if
External Speaker is disabled.
Operating the Transceiver
 Making the External Speaker Ready for Use
1
Press the External Speaker
External Speaker becomes enabled and Tone A sounds from the internal speaker. "SP" appears for 1 sec on the LED display.
If the 2 dots on the LED display (the left dot and the right dot) and the LED (blue) are configured to light, each LED lights while
External Speaker is enabled.
 Making the Internal Speaker Ready for Use
1
Press the External Speaker
External Speaker becomes disabled and Tone B sounds from the internal speaker.
Note
• The external and internal speakers can be switched only if the external speaker is connected to the D-sub connector of the transceiver.
Refer to the service manual for instructions on how to connect an external speaker to the D-sub connector of the transceiver.
• Pressing the External Speaker key while Public Address is enabled, Public Address becomes disabled and External Speaker
becomes enabled. Pressing the Public Address key while External Speaker is enabled, Public Address also becomes enabled.
(Refer to 6.6 Using the Transceiver as a Megaphone (Public Address) on page
• The transceiver can be configured to light the 2 dots on the LED display (the left dot and the right dot) and the LED (blue) when the
External Speaker is enabled. (Refer to
Configuration using KPG-175D
Assigning functions to the PF keys (
FUNC (K)/Ver 1.20
key while External Speaker is disabled.
key while External Speaker is enabled.
5.5 Lighting the LEDs According to the Transceiver's Status on page
Edit > Key Assignment)
See
35.)
25.)
CONTENTS INDEX 40