Dtmf (Dual Tone Multi Frequency) Calls - Kenwood NX-5200K3 User Manual

DTMF (DUAL TONE MULTI FREQUENCY) CALLS

Note:
DTMF calls can be made only in Analog Conventional and NXDN Conventional Operation.
●
MAKING A DTMF CALL
Manual Dialing (Full key model only)
o
1
Press and hold the PTT switch.
2
Enter the desired digits using the DTMF keypad.
The corresponding DTMF tones sound each time you press a key.
●
If you release the PTT switch, transmit mode will end even if the complete number has
●
not been sent.
Keypad Auto PTT (Full key model only)
o
If your dealer has activated the Keypad Auto PTT function, simply press the keys on
the keypad to make the call.
The DTMF code will be sent automatically when you press a key.
●
Store & Send
o
1
Enter the desired digits using the DTMF keypad.
The digits appear on the display as you enter them.
●
You can enter digits by using the [J] and [K] keys. Press these keys to cycle through
●
the DTMF digits.
You can enter up to 34 digits before transmitting.
●
2
After entering the complete number, press the PTT switch to transmit.
Stun Code
o
This function is used when a transceiver is stolen or lost.
When the transceiver receives a call containing a stun code, either the transmit mode
or both the receive and transmit mode will be disabled. The stun code is canceled
when the transceiver receives a call with a revive code.
40