Table of Contents
Advertisement
14 COMMUNICATIONS IN AN EMERGENCY
14.5 ID to Be Sent When Emergency Mode Is Activated
14.5
ID to Be Sent When Emergency Mode Is Activated
DTMF code, FleetSync ID, or NXDN ID can be sent as an Emergency ID each time the transceiver starts automatic
transmission and reception in Emergency Mode.
Emergency ID
Emergency ID is the code to be sent or the control type each time the transceiver starts automatic transmission and
reception in Emergency Mode.
Emergency ID can be configured separately for an Analog Conventional system and an NXDN Conventional system using
KPG-169D/ KPG-170D/ KPG-175D.
Configuration
The transceiver transmits and receives according to the configuration for the Zone-channel used for Emergency
None
Mode.
The transceiver first sends the DTMF code configured for Emergency DTMF ID (Key) or Emergency DTMF ID
DTMF
(Lone Worker) when transmitting in Emergency Mode.
The transceiver first sends the FleetSync SelCall ID configured for Emergency Call Fleet and Emergency Call ID
FleetSync
when transmitting in Emergency Mode.
MDC-1200
The transceiver first sends the MDC-1200 packet when transmitting in Emergency Mode.
Configuration
The transceiver transmits and receives according to the configuration for the Zone-channel used for Emergency
None
Mode.
NXDN
The transceiver sends a call configured for Emergency NXDN ID Type when transmitting in Emergency Mode.
Configuration using KPG-169D/ KPG-170D/ KPG-175D
Configuring the Emergency ID (Analog) (
Configuring the Emergency ID (NXDN Conventional) (
Emergency DTMF ID
Emergency DTMF ID is the DTMF code to be sent first in Emergency Mode if "DTMF" is configured for Emergency ID
(Analog).
The DTMF code to be sent varies as below depending on what caused the transceiver to enter Emergency Mode:
•
Emergency DTMF ID (Key)
This is the DTMF code to be sent first when the transceiver starts transmitting after the transceiver enters Emergency
Mode by pressing the Emergency key.
•
Emergency DTMF ID (Lone Worker)
This is the DTMF code to be sent first when the transceiver starts transmitting after the transceiver enters Emergency
Mode by Lone Worker.
FUNC (K)/Ver 1.20
Table 14-9 Emergency ID (Analog)
Table 14-10 Emergency ID (NXDN Conventional)
See
Edit > Emergency Information)
Edit > Emergency Information)
See
Description
Description
CONTENTS
INDEX
159
Advertisement
Table of Contents
