Kenwood NX-240 Function Reference page 59

6 SOUND
6.5 Functions Related to the Volume Configuration
6.5 Functions Related to the Volume Configuration
The following functions are relevant to the volume configuration:
• Minimum Volume
• Maximum Volume
• Tone Volume
Configuring the Minimum Volume Level (Minimum Volume)
Portable
For Portable, Minimum Volume can be used to retain the minimum volume level even if the Volume control is turned to its
lowest level.
The remaining volume of audio prevents the user from failing to hear the received audio even if the Volume control has
been fully turned down erroneously. If Minimum Volume is not configured, received audio does not sound when the
Volume control is fully turned down.
Mobile
For Mobile, how the Minimum Volume will function varies depending on the configuration for Minimum Volume Type.
 If "Preset" is configured for Minimum Volume Type
Minimum Volume enables the volume level configured for Minimum Volume to be applied when the transceiver is
turned ON again after the volume level was fully turned down and the transceiver was turned OFF.
 If "Lowest Limit" is configured for Minimum Volume Type
Minimum Volume can be used to maintain an audible volume level even if the volume level is turned down.
The remaining volume of audio prevents the user from failing to hear the received audio even if the Volume control has
been fully turned down erroneously. Turning up the volume causes the volume level to be increased from the audio
level configured for the volume level. If "0" is configured for Minimum Volume, received audio does not sound when the
Volume control is fully turned down.
Configuration using KPG-169D/ KPG-170D
Configuring the Minimum Volume (
Configuration using KPG-175D
• Configuring the Minimum Volume (
• Configuring the Minimum Volume Type (
Configuring the Maximum Volume Level (Maximum Volume)
Supported Models: Mobile
Maximum Volume can be used to limit the volume level from exceeding the configured volume level even if the Volume
control is turned up.
This prevents a user from discomfort caused by an excessive volume level when wearing a headset.
Configuration using KPG-175D
Configuring the Maximum Volume (
FUNC (K)/Ver 1.20
See Edit > Optional Features > Common 2 > Minimum Volume)
See Edit > Optional Features > Common 2 > Audio Tone)
See Edit > Optional Features > Common 2 > Audio Tone)
Edit > Optional Features > Common 2 > Audio Tone)
See
CONTENTS INDEX 34