Tones That Sound When The Transceiver Receives A Call; (Alert Tone Pattern) - Kenwood NX-240 Function Reference

6 SOUND

6.2 Tones that Sound When the Transceiver Receives a Call

6.2 Tones that Sound When the Transceiver Receives a Call
An Alert Tone sounds from the transceiver when the transceiver receives an Individual Call or a Group Call and notifies the
user of the reception.
The Alert Tone pattern can be configured by selecting from 8 types of tones configured for Special Alert Tone. (Refer to
Configuring the Alert Tone (Alert Tone Pattern) on this
Following are the types of Alert Tone.
DTMF
Alert Tone (Individual Call)
Alert Tone (Group Call)
2-tone
Alert Tone
FleetSync
Alert Tone (Individual Call)
Alert Tone
(Other Selective Calls)
Alert Tone (Paging Call)
NXDN
Alert Tone (Individual Call)
Alert Tone (Group Call)
Alert Tone (Paging Call)
Configuration using KPG-169D/ KPG-170D/ KPG-175D
• Configuring various Alert Tones (DTMF) (
• Configuring the Alert Tone (2-tone) (
• Configuring various Alert Tones (FleetSync) (
• Configuring various Alert Tones (NXDN) (
Configuring the Alert Tone (Alert Tone Pattern)
Alert Tone Pattern is the alert tone pattern when receiving a call with the optional signaling. An Alert Tone that is suitable
for a user's environment can be selected.
Alert Tone Pattern can be selected from 8 patterns of Alert Tones. An Alert Tone pattern consists of 16 tones.
Alert Tone Pattern can be configured by using KPG-169D/ KPG-170D/ KPG-175D. The following table shows the
configuration items.
FUNC (K)/Ver 1.20
page.)
Table 6-9 Alert Tone
This tone sounds from the transceiver when the transceiver receives an Individual Call using DTMF.
This tone sounds from the transceiver when the transceiver receives a Group Call using DTMF.
This tone sounds from the transceiver when the transceiver receives a call using a 2-tone code.
This tone sounds from the transceiver when the transceiver receives an Individual Call using FleetSync.
This tone sounds from the transceiver when the transceiver receives a Group Call, Fleet Call, Supervisor
Call, or Broadcast Call using FleetSync.
This tone sounds from the transceiver when the transceiver receives a Paging Call using FleetSync.
This tone sounds from the transceiver when the transceiver receives an Individual Call using NXDN.
This tone sounds from the transceiver when the transceiver receives a Group Call using NXDN.
This tone sounds from the transceiver when the transceiver receives a Paging Call using NXDN.
Edit > DTMF > Decode > Alert Tone)
See
Edit > 2-tone > Decode (2-tone 1 to 3))
See
See
Edit > NXDN > Conventional > Alert Tone)
See
Edit > FleetSync > General 2 > Alert Tone)
CONTENTS INDEX 31