Table of Contents
Advertisement
5 INDICATION AND DISPLAY
5.4 LED Display
Status
Stun state
Autodial Mode
Transceiver Password Mode
Operator Selectable Tone Mode
Squelch Level Mode
Talk Around
FUNC (K)/Ver 1.20
Indication
Autodial
Autodial list number
Redial
Remarks
NXDN:
Refer to
8.11 Disabling the Transceiver Capability
by Remote Control (Stun/ Kill) on page
Analog:
Refer to
9.10 Disabling the Transceiver Capability
by Remote Control (Stun) on page
Refer to
12 DTMF on page
132.
Refer to
20.1 Password for Transceiver Operation
(Transceiver Password) on page
Appears for 1 sec when the transceiver enters
Operator Selectable Tone Mode.
Refer to
9.3 Changing the Decode/ Encode
Combination of QT/DQT to Communicate (OST) on
page
97.
"SL" appears for 1 sec when the transceiver enters
Squelch Level Mode.
Subsequently, the current squelch level appears
and the right dot blinks.
Refer to
Adjusting the Squelch Level (Squelch
Level) on page
88.
Appears for 1 sec when Talk Around becomes
enabled.
NXDN:
Refer to
Communicating Without Using a Repeater
(Talk Around) on page
53.
Analog:
Refer to
Communicating Without Using a Repeater
(Talk Around) on page
92.
CONTENTS
85.
106.
192.
INDEX
22
Advertisement
Table of Contents
