Table of Contents
Advertisement
11 MDC-1200
11.1 Sending a PTT ID
Emitting a Tone at the Timing to Send the PTT ID (PTT ID Sidetone)
PTT ID Sidetone is the function to emit a PTT ID Sidetone from the speaker of the transmitting transceiver after the
transceiver sends the ID (Own) in the MDC-1200 format.
The calling user can notice the timing to start speaking by the PTT ID Sidetone.
If the calling user starts speaking without noticing that the ID (Own) in the MDC-1200 format is still being sent, the
beginning of the transmitted audio may not be emitted from the speaker of the receiving transceiver. To prevent this
problem, this function needs to be used.
Configuration using KPG-169D/ KPG-170D/ KPG-175D
Configuring the PTT ID Sidetone to be enabled or disabled (
Muting the PTT ID Tone (PTT ID Mute)
PTT ID Mute is the function to unmute after a certain amount of time elapses when the transceiver receives an analog
signal. This function is used to mute data tones of the PTT ID (BOT) sent by the other party.
Refer to
10.3 Sending a PTT ID on page 108
Preventing Sending the PTT ID Repeatedly (PTT ID Pause)
PTT ID Pause is the function to keep the PTT ID from being sent when the transceiver alternates between transmit and
receive in a certain period of time. This function can be used to prevent sending the PTT ID repeatedly to the receiving
party.
Refer to
10.3 Sending a PTT ID on page 108
FUNC (K)/Ver 1.20
Edit > MDC-1200 > General 1)
See
for details.
for details.
CONTENTS
INDEX
128
Advertisement
Table of Contents
