Table of Contents
Advertisement
About Communication Methods
About Communication Methods
Following are the communication methods that the transceiver can use.
Communication Method
Voice calls using an NXDN
ID
Data communications using
an NXDN ID
Voice calls using a
FleetSync ID
Data communications using
a FleetSync ID
Data communications using
the MDC-1200 format
Individual calls using an
Optional Signaling
Direct communications
between transceivers
(Talk Around)
*1
This mode is available only in Very Narrow.
*2
This mode is available only in Narrow.
FUNC (K)/Ver 1.20
Description
The transceiver can make following individual or group calls by
using an NXDN ID.
• Individual Call
• Group Call
The transceiver can make a Status Call by using an NXDN
protocol.
The transceiver can make following voice calls by using a
FleetSync ID.
• Individual Call
• Group Call
• Fleet Call
• Supervisor Call
• Broadcast Call
The transceiver can make a Status Message Call by using a
FleetSync ID.
The transceiver can use following functions by using the
MDC-1200 format.
• PTT ID Encode
• Emergency Encode
• Radio Check Decode
• Stun/ Revive Decode
The transceiver can make an individual call by using following
Optional Signalings.
• DTMF
• 2-tone
• FleetSync ID
• NXDN ID
The transceiver can communicate directly with a target transceiver
by using the Talk Around function when the transceiver is operated
via a repeater.
Available System
NXDN Conventional System
NXDN Conventional System
Analog Conventional System
Analog Conventional System
Analog Conventional System
Analog Conventional System
NXDN Conventional System
• DTMF, 2-tone, and FleetSync can
be used only in an Analog
*2
Conventional system.
• NXDN ID can be used only in an
NXDN Conventional system.
Analog Conventional System
NXDN Conventional System
CONTENTS
INDEX
*1
*1
*2
*2
*2
*1
*2
*1
xii
Advertisement
Table of Contents
