Kenwood NX-240 Function Reference page 71

7
BATTERY
Supported Models: Portable
A user can be notified on the level of the remaining battery power by LED. And, a user can also use the function to save
the battery consumption.
7.1 Warning that the Battery Voltage Is Low (Battery Warning)
Battery Warning can be used to notify a user by emitting a beep or blinking the LED when the battery power is low.
Configuration
The transceiver monitors whether the battery voltage goes low while transmitting, and notifies a user that the
remaining battery power is low in the following way.
If the battery voltage level goes lower than the warning voltage level of 6.2 V while transmitting:
While Transmitting
If the battery voltage level goes lower than the warning voltage level of 5.8 V while transmitting:
The transceiver always monitors while the transceiver is turned ON whether the battery voltage goes low,
and notifies a user that the remaining battery power is low in the following way.
If the battery voltage level reaches the warning voltage level of 6.4 V:
Always
If the battery voltage level goes lower than the warning voltage level of 5.8 V:
The transceiver always monitors while the transceiver is turned ON whether the battery voltage goes low,
and notifies a user that the remaining battery power is low in the following way.
If the battery voltage level reaches the warning voltage level of 6.2 V:
Always - Late Warning
If the battery voltage level goes lower than the warning voltage level of 5.8 V:
* Values for the warning voltage level are reference values and these values are not guaranteed for all transceivers.
Also, if Battery Warning Tone is enabled, the transceiver notifies a user that the remaining battery capacity is low by
making the Battery Warning Tone sound from the transceiver if the PTT switch is not pressed when the battery voltage
level goes lower than the warning voltage level.
Configuration using KPG-169D/ KPG-170D
• Configuring the Battery Warning (
• Configuring the Battery Warning Tone to be enabled or disabled (
Battery)
FUNC (K)/Ver 1.20
Table 7-1 Battery Warning
The Transmit LED blinks red.
The transmission ends. If the PTT switch is pressed, a Warning Tone A sounds from the transceiver and
the transceiver cannot transmit.
The Transmit LED blinks red.
The transmission ends. If the PTT switch is pressed, a Warning Tone A sounds from the transceiver and
the transceiver cannot transmit.
The warning voltage level is configured as the voltage lower than the configuration for Always (6.2 V) and
the Transmit LED starts blinking red later than normal. The transceiver does not behave differently.
Transmission is still available at this point.
The transmission ends. If the PTT switch is pressed, a Warning Tone A sounds from the transceiver and
the transceiver cannot transmit.
See Edit > Optional Features > Common 2 > Battery)
Description
See Edit > Optional Features > Common 2 >
CONTENTS INDEX 46