Kenwood NX-240 Function Reference page 193

15 COMMUNICATION SECURITY
15.2 Encryption (NXDN Digital)
Configuring the Encryption Key Data Used for Communications
Supported Models: Mobile
Pressing and holding the Scrambler/ Encryption Code key causes the transceiver to enter Scrambler/ Encryption Code
Mode. In the Scrambler/ Encryption Code Mode, the encryption key data used for communications can be configured by
selecting the key data from the Multi-key List. (Refer to
Note
• For Mobile, the Multi-key List number having the encryption key data can also be configured for each channel by using KPG-175D.
In addition, the Multi-key List number configured for each channel by using KPG-175D can be changed by the operation of the
transceiver.
• For Portable, the Multi-key List number having the encryption key data can be configured for each channel by using KPG-169D/
KPG-170D.
Operating the Transceiver
1
Press and hold the
The transceiver enters Scrambler/ Encryption Code Mode. "co" appears on the LED display for 1 sec and then the Multi-key
List number configured for the selected channel appears. The right dot blinks at this time.
2
Select a Multi-key List number by pressing the
3
Press the [S] key.
The transceiver exits Scrambler/ Encryption Code Mode and the selected Multi-key List number is configured for the
transceiver.
Configuration using KPG-169D/ KPG-170D
Configuring the Multi-key List Number (
Configuration using KPG-175D
• Assigning functions to the PF keys (
• Configuring the Multi-key List Number (
FUNC (K)/Ver 1.20
Multi-key List on page
Scrambler/ Encryption Code
Edit > Zone Information > Channel Edit > Page 2 > Encryption Settings)
See
Edit > Key Assignment)
See
Edit > Zone Information > Channel Edit > Page 2 > Encryption Settings)
See
170.)
key.
[<B] or [C>] key.
CONTENTS INDEX 168