Table of Contents
Advertisement
A APPENDIX
A.2 Available Functions for COM Port
A.2
Available Functions for COM Port
Portable
For Portable, the COM port 0 is assigned to the 2.5/ 3.5D connector (TXD/ RXD).
The following functions can be assigned to the communication port using KPG-169D/ KPG-170D:
Configuration
None
The transceiver can communicate with KPG-169D/ KPG-170D.
Position data can be acquired from the microphone with a GPS receiver unit. The received GPS data can be
GPS
transferred. The transceiver can communicate with KPG-169D/ KPG-170D.
Configuration using KPG-169D/ KPG-170D
Assigning functions to COM port (
Mobile
Mobile has the following 2 communication ports:
COM port 0
COM port 0 is assigned to the microphone jack on the front panel (TXD: Pin No.4/ RXD: Pin No.7).
COM port 1
COM port 1 is assigned to the D-sub 15-pin connector on the rear panel (TXD: Pin No.6/ RXD: Pin No.7).
The following functions can be assigned to communication ports using KPG-175D:
Configuration
None
The transceiver can communicate with KPG-175D.
The transceiver can communicate with a PC by using PC commands.
Data
The transceiver can communicate with KPG-175D.
GPS
Note
"Data" cannot be assigned to both COM port 0 and COM port 1 one at a time.
Configuration using KPG-175D
Assigning functions to COM port (
FUNC (K)/Ver 1.20
Table A-3 Available Functions for COM Ports (Portable)
Communication Port
Edit > Optional Features > Common 3 > Function)
See
Table A-4 Available Functions for COM Ports (Mobile)
COM port 0
-
See
Edit > Extended Function > AUX > Function)
COM port 0
Communication Port
Position data can be acquired from the GPS receiver
unit. The received GPS data can be transferred.
The transceiver can communicate with KPG-175D.
CONTENTS
COM port 1
INDEX
202
Advertisement
Table of Contents
