Table of Contents
Advertisement
A APPENDIX
A.1 Available Functions for the PF Keys
Function Name
In an Analog Conventional system, the transceiver disables QT tone or DQT code and
Optional Signaling, and unmutes the speaker upon detection of a carrier.
Refer to
Temporarily Disabling the Signaling (Monitor) on page
Monitor
In an NXDN Conventional system, the transceiver disables RAN code and Optional
Signaling, and unmutes the speaker upon detection of an NXDN frame.
Refer to
Temporarily Disabling the Signaling (Monitor) on page
While the Monitor Momentary key is pressed and held in an Analog Conventional
system, the transceiver disables QT tone or DQT code and Optional Signaling, and
unmutes the speaker upon detection of a carrier.
Monitor
Refer to
Temporarily Disabling the Signaling (Monitor) on page
Momentary
While the Monitor Momentary key is pressed and held in an NXDN Conventional
system, the transceiver disables RAN code and Optional Signaling, and unmutes the
speaker upon detection of an NXDN frame.
Refer to
Temporarily Disabling the Signaling (Monitor) on page
A Paging Call is initiated to the target ID configured for the selected channel.
Paging Call
Refer to
8.3 Making an Individual Call/ Paging Call on page
Refer to
10.4 Making a Selective Call/ Paging Call on page
Priority Zone-
The selected channel will be a Priority Channel.
Channel Select
Refer to
16.2 Scanning the Specific Channel Preferentially (Priority Scan) on page
The transceiver starts or stops scanning.
Scan
Refer to
16 SCAN on page
By selecting a channel to be scanned and pressing the Scan Temporary Delete key, the
Scan Temporary
channel will be deleted temporarily from the channels to be scanned.
Delete
Refer to
Temporarily Deleting a Channel to Be Scanned (Scan Temporary Delete) on
page 175
Scrambler/
A user can toggle the Voice Scrambler/ Encryption between enabled and disabled.
Encryption
Refer to
15 COMMUNICATION SECURITY on page
A user can manually send the received GPS data from the microphone with an optional
Send the GPS
GPS receiver unit to the base station via a communication port of the transceiver.
data
Refer to
8.10 Sending GPS Data on page
Refer to
10.7 Sending GPS Data on page
The transceiver opens squelch and unmutes the speaker.
Squelch Off
Refer to
Temporarily Disabling the Squelch (Squelch Off) on page 87
The transceiver opens squelch and unmutes the speaker while the Squelch Off
Squelch Off
Momentary key is pressed and held.
Momentary
Refer to
Temporarily Disabling the Squelch (Squelch Off) on page 87
A user can toggle the Talk Around between enabled and disabled.
Talk Around
Refer to
Communicating Without Using a Repeater (Talk Around) on page 53
Refer to
Communicating Without Using a Repeater (Talk Around) on page 92
Zone Down
The zone number decreases in steps of 1.
Zone Up
The zone number increases in steps of 1.
*1
ALL indicates that the function can be used in all systems.
FUNC (K)/Ver 1.20
Description
172.
163.
82.
121.
95.
56.
95.
56.
58.
111.
172.
CONTENTS
*1
Available System
ALL
ALL
ALL
ALL
ALL
ALL
ALL
ALL
Analog Conventional
system
Analog Conventional
system
ALL
ALL
ALL
INDEX
198
Advertisement
Table of Contents
