Table of Contents
Advertisement
13 GPS FUNCTIONS
13.7 GPS Report Back to Requested ID
13.7
GPS Report Back to Requested ID
GPS Report Back to Requested ID is the function that enables the receiving transceiver to send the GPS data to the ID of
the transceiver, which sends a GPS Polling Request, upon receipt of the following GPS Polling Requests:
•
GPS Data Single Polling Request
•
GPS Data Multiple Polling Request
Configuration
Upon receipt of a GPS Polling Request, the transceiver sends the GPS data to the ID of the transceiver that sent the
Enabled
GPS Polling Request.
NXDN:
Upon receipt of a GPS Polling Request, the transceiver sends the GPS data to the ID configured for Base ID (GPS).
If Base ID (GPS) is not configured, the GPS data is sent to the ID configured for Base ID. (Refer to
Disabled
Target Transceiver (Base ID) on page
FleetSync:
Upon receipt of a GPS Polling Request, the transceiver sends the GPS data to the FleetSync ID configured for Base
Fleet and Base ID. (Refer to
Note
NX-240/ 240V/ 340/ 340U/ 740H/ 740HV/ 840H/ 840HU cannot send a GPS Polling Request.
Configuration using KPG-169D/ KPG-170D/ KPG-175D
Configuring the GPS Report Back to Requested ID to be enabled or disabled (
FUNC (K)/Ver 1.20
Table 13-2 Configuring GPS Report Back to Requested ID
82.)
The ID of the Target Transceiver (Base Fleet/ Base ID) on page
Description
Edit > Optional Features > GPS)
See
CONTENTS
The ID of the
121.)
INDEX
148
Advertisement
Table of Contents
