Table of Contents
Advertisement
15 COMMUNICATION SECURITY
15.2 Encryption (NXDN Digital)
Configuration using KPG-169D/ KPG-170D/ KPG-175D
•
Configuring the encryption key data (
•
Configuring the Encryption to be enabled or disabled (
Encryption Settings)
•
Configuring the Multi-key List Number (
Encryption Settings)
Enabling the Encryption
Encryption is enabled by a user selecting an NXDN digital channel where Encryption is enabled.
Note
If "Zone-Channel + Others" is configured for Voice Announcement, "Encryption" is announced following the announcement of the zone
number and channel number when a channel where Encryption is enabled is selected. (Refer to
page
37.)
Toggling the Encryption between Enabled and Disabled
The configuration status of Encryption for each channel can be toggled between enabled and disabled by using the
Scrambler/ Encryption key.
Pressing the Scrambler/ Encryption key toggles the status of Encryption between enabled and disabled.
Operating the Transceiver
Enabling the Encryption
1
Press the
Scrambler/ Encryption
A Tone A sounds from the transceiver and Encryption becomes enabled.
For Mobile, "Ec" appears for 1 sec. In addition, for Mobile, if the 2 dots on the LED display (the left dot and the right dot) and the
LED (blue) are configured to light, each LED lights while Encryption is enabled.
Disabling the Encryption
1
Press the
Scrambler/ Encryption
A Tone B sounds from the transceiver and Encryption becomes disabled.
Note
• If "Zone-Channel + Others" is configured for Voice Announcement, "Encryption" is announced when Encryption becomes enabled. In
this case, a Tone A does not sound. (Refer to
• For Mobile, the transceiver can be configured to light the 2 dots on the LED display (the left dot and the right dot) and the LED (blue)
when Encryption is enabled. (Refer to
Configuration using KPG-169D/ KPG-170D/ KPG-175D
Assigning functions to the PF keys (
FUNC (K)/Ver 1.20
See
Edit > Encryption)
See
Edit > Zone Information > Channel Edit > Page 2 >
See
key while Encryption is disabled.
key while Encryption is enabled.
6.7 Using Voice Announcement on page
5.5 Lighting the LEDs According to the Transceiver's Status on page
See
Edit > Key Assignment)
Edit > Zone Information > Channel Edit > Page 2 >
6.7 Using Voice Announcement on
37.)
CONTENTS
25.)
INDEX
167
Advertisement
Table of Contents
