Sounds; Tone Pattern; Power-On Tone; Control Tone - Kenwood TK-2170 Series Function Reference

4 SOUNDS

4.1

Tone Pattern

Following tones can be configured for the transceiver.
Table 4-1 Tone List
Tone Type
This tone notifies a user that the

Power-on Tone

transceiver is turned ON.
• Power-on Tone
The transceiver emits this tone when
the transceiver operates.
• Key Beep A
• Key Beep B
• Key Beep C
• Key-entry Error Tone
• Rollover Tone
• Password Authorization Tone
• Queue Tone

Control Tone

• Free System Ringback Tone
• System Search Mode Tone
• Ringer Tone
• Priority Channel Tone
• Scan Stop Tone
• Free Channel Tone
• Individual Call Tone
• Fleet Call Tone
• Group Call Tone
The transceiver emits this tone to
warn a user.
• Warning Tone A
• Warning Tone B
• Warning Tone C
• TOT Pre-alert Tone
• Battery Warning Tone
• PLL Unlock Tone
Warning Tone
• Busy Tone
• Man-down Pre-alert Tone
• Delay Tone
• Intercept Tone
• Deny Tone
• System Search Tone
• System Search End Tone
• Data Send Error Tone
The transceiver emits this tone when
the transceiver starts or finishes an
automatic transmission in
Locator Tone
Emergency Mode.
• Duration of Locator Tone 1 to
Duration of Locator Tone 2
The transceiver emits this tone when
communication is established or the
transceiver finishes transmitting.
• PTT Proceed Tone
Sidetone
• VOX Proceed Tone
• PTT ID Sidetone
• Sidetone (DTMF)
• Sidetone (2-tone)
The transceiver emits this tone when
the transceiver receives a call or
Alert Tone
message.
• Alert Tone 1 to Alert Tone 8
FUNC (K)/Ver. 1.01
Description and
Tone Names
Confidential
4.1.1 Power-on Tone
The transceiver emits this tone when the transceiver is
turned ON.
Table 4-2 Power-on Tone List
Function
The transceiver emits this tone when
Power-on Tone
the transceiver is turned ON.
4.1.2 Control Tone
The transceiver emits this tone when a function activates.
Table 4-3 Control Tone List
Function
The transceiver emits this tone when
Key Beep A a function is enabled by pressing a
key.
The transceiver emits this tone when
Key Beep B a function is disabled by pressing a
key.
The transceiver emits this tone when
data, such as DTMF Memory or a
Key Beep C Test Mode adjustment value, is
written to the transceiver by pressing
a key.
The transceiver emits this tone when
the operation activated by pressing a
key is denied. The transceiver emits
Key-entry Error Tone
this tone if an inoperable key is
pressed in Selcall Entry or OST
Select Mode.
The transceiver emits this tone when
Rollover Tone the smallest zone number or CH/
GID is selected.
Password Authorization The transceiver emits this tone if the
Tone password matches.
The transceiver emits this tone while
the transceiver searches for an
available RIC repeater using Auto
Telephone in LTR Trunking System.
Queue Tone The transceiver keeps emitting this
tone until Auto Telephone is
disabled due to not finding an
available RIC repeater within 60
seconds.
The transceiver emits this tone if the
Free System Ringback transceiver enters Free System
Tone Ringback Mode in LTR Trunked
System.
The transceiver emits this tone if the
System Search Mode
transceiver enters System Search
Tone
Mode in LTR Trunked System.
Description
Description
19
Contents Index