Table of Contents
Advertisement
14 COMMUNICATIONS IN AN EMERGENCY
14.2 Zone-Channel Used for Emergency Mode
14.2
Zone-Channel Used for Emergency Mode
The Zone-channel to be used when the transceiver enters Emergency Mode can be configured.
Emergency Zone-Channel Type
Emergency Zone-Channel Type is the type of a Zone-channel used when the transceiver is placed in Emergency Mode.
Emergency Zone-Channel Type can be configured using KPG-169D/ KPG-170D/ KPG-175D.
Configuration
When the transceiver enters Emergency Mode, the transceiver initiates the Emergency operation on the
Selected
selected Zone-channel.
When the transceiver enters Emergency Mode, the transceiver migrates to the Zone-channel configured for
Fixed
Emergency Zone-Channel, and then the transceiver initiates the Emergency operation.
The transceiver behaves as below according to the configuration for Emergency Zone-Channel Type:
Selected
•
A Zone-channel in the Analog Conventional system is selected.
The transceiver behaves according to the configuration for Emergency ID (Analog).
Configuration
None
The transceiver transmits only using a QT tone or a DQT code.
DTMF, FleetSync,
The transceiver transmits according to the configuration for DTMF, FleetSync or MDC-1200.
MDC-1200
•
A Zone-channel in the NXDN Conventional system is selected.
The transceiver behaves according to the configuration for Emergency ID (NXDN Conventional).
Configuration
None
The transceiver transmits only using the RAN code.
If "Group ID" is configured for Emergency NXDN ID Type, the transceiver initiates a Group Call using the Group
ID configured for Emergency NXDN ID.
NXDN
If "Unit ID" is configured for Emergency NXDN ID Type, the transceiver initiates an Individual Call using the Unit
ID configured for Emergency NXDN ID.
FUNC (K)/Ver 1.20
Table 14-1 Emergency Zone-Channel Type
Table 14-2 Emergency ID (Analog)
Table 14-3 Emergency ID (NXDN Conventional)
Description
Description
Description
CONTENTS
INDEX
153
Advertisement
Table of Contents
