Table of Contents
Advertisement
6 SOUND
6.6 Using the Transceiver as a Megaphone (Public Address)
Note
• While Public Address is enabled, the transceiver cannot transmit.
• To use Public Address, an external speaker for Public Address is required. Refer to the service manual for instructions on how to
connect an external speaker for Public Address to the transceiver.
• While the Public Address function is used by pressing the PTT switch, only the following keys are activate.
Emergency
LED Brightness
Volume Down/ Volume Up
• While Public Address is enabled, Public Address is disabled by operating one of the following keys:
AUX
Autodial
Call 1/ Call 2
Channel Down/ Channel Up
Channel Entry
CW Message
Direct Zone-Channel
Emergency
External Speaker
Lone Worker
Operator Selectable Tone
Paging Call
Priority Zone-Channel Select
Public Address
Scan
Scrambler/Encryption Code
Send the GPS data
Squelch Level
Talk Around
Zone Down/ Zone Up
• The transceiver can be configured to light the 2 dots on the LED display (the left dot and the right dot) and the LED (blue) when the
Public Address is enabled. (Refer to
Configuration using KPG-175D
Assigning functions to the PF keys (
FUNC (K)/Ver 1.20
5.5 Lighting the LEDs According to the Transceiver's Status on page
Edit > Key Assignment)
See
25.)
CONTENTS
INDEX
36
Advertisement
Table of Contents
