Use The Flash Boot Rom Utility - Nortel Meridian 1 Option 11C Upgrade Manual

Page 212 of 224

Use the Flash Boot ROM utility

553-3021-250 Standard 7.00
Use the flash boot ROM utility
3 Select the Utilities function.
4 Select the Flash Boot ROM utility.
5 Select the Flash Boot ROM option you want.
6 Start the selected Flash Boot ROM function.
The following procedure describes how to use the Flash Boot ROM utility.
Procedure 28
Use the Flash Boot ROM utility
1 If the Software Delivery card is not installed, install it in the socket
in the faceplate of the Option 11C SSC or the Option 11C Mini
MSC card.
Carefully press on the PCMCIA card until it seats tightly.
2 Use Overlay 143 to start the Software Installation Program.
Note: The response to
following response is an example only:
LOGI
PASS?
0000 <CR>
LD 143 <CR>
UPGRADE CR>
a Look for the following screen message:
62)7:$5( ,167$//$7,21 352*5$0
b Do one of the following:
• If the screen displays the message, go to Step 3.
• If the screen does not display the message, repeat Step 2 (this
step), and make sure you enter the correct information.
3 Select Utilities (item 3) from the Main Menu.
4 Select Flash Boot ROM Utilities (item 7) from the Utilities menu.
April 2000
3$66"
is different for each system. The