Page 58 of 224
Upgrade a two-cabinet system with metal cable to Option 11C
553-3021-250
Standard 7.00
Figure 19
Cable connection
SDI Port
19
Connect the power to the main cabinet.
Set the circuit breaker switch on the front of the power supply unit in
the cabinet to ON.
If equipped with reserve battery power, set the circuit breaker switch
on the reserve battery power unit to ON.
20
Observe the terminal screen.
When you power up, the Software Installation Program starts
automatically.
Note: This program is menu-driven allowing the easy installation of
software and customer databases in the Option 11C. It is clear and
direct and includes a Help facility to help you make correct selections.
However, if you need more detailed information, refer to the Option
11C Planning and Installation Guide (553-3021-210) .
April 2000
Ethernet Connector