Nortel Meridian 1 Option 11C Upgrade Manual page 128

Page 128 of 224
553-3021-250 Standard 7.00
Upgrade the NTDK20AB SSC to NTDK20EA or later
Figure 55
P0891070 SSC Faceplate
12 Remove the existing SIMM (see Figure 56 for location of SIMM).
Replace it with the 16 M SIMM provided with the upgrade kit.
13 Install the expansion daughterboards in their assigned fiber
connector on the SSC card. Then connect LED cables see
(Figure 54) and interface cables see (Figure 56).
Note: You do not use the LED cables with single port daughterboards.
April 2000