Feature set and ISM parameters upgrade
7
Define the AUX ID.
The default AUX ID is either the security ID provided with the
Option 11C or the Option 11C Mini, or the original 11/11E site ID.
Note: The AUX ID is on your Keycode Data Sheet and must match
either the security ID (11C or 11C Mini) or the original site ID (11, 11E).
8
Review and confirm the information entered.
The screen displays Same Release Upgrade Summary. Review and
confirm the information displayed.
9
Enter the keycodes when prompted.
After the system confirms and accepts the keycodes, the following
prompt appears:
Are you sure you wish to perform the installation?
10
Enter y in response to the prompt.
If the only change is an increase in ISM parameter values, a screen
message states that you do not need a sysload. The system has put
into operation changes to the ISM values.
If there must be a system reload (SYSLOAD), it does not need to occur
immediately. The Option 11C or the Option 11C Mini stores the
information until you perform the SYSLOAD. Because a SYSLOAD
interrupts service on the system, it is better to start it later when a
service interruption is less inconvenient.
—————————— End of Procedure ——————————
Option 11C and 11C Mini
Page 193 of 224
Upgrade Procedures Guide