Nortel Meridian 1 Option 11C Upgrade Manual page 192

Page 192 of 224
553-3021-250 Standard 7.00
Feature set and ISM parameters upgrade
Note: To answer the following questions, you need information about
the Keycode Data Sheet. Please have it available.
Procedure 22
Upgrade feature set and ISM parameters
1 Start the Software Installation Program using overlay program
143.
a Type LOGI and press <CR> to log in to the system.
The prompt PASS? displays.
b Enter the system password in response to the prompt.
2 Select "System Upgrade" (item 2) from the Software Installation
Main Menu.
The "Select Type of Upgrade to be Performed" menu displays.
3 Select "Option 11C Feature/Parameter Upgrade" (item 3) from the
"Select Type of Upgrade to be Performed" menu.
Note: In the software menu, Option 11C appears for both Option 11C
and Option 11C Mini.
4 Indicate if you want to change the current feature set.
Note: The feature set selected must match that provided with the
keycodes.
— If you want to change the current feature set, enter y (for yes). The
system prompts you to select the new feature set.
— If you want to keep the current feature set, enter n (for no).
5 Indicate if there are packages to add.
6 Review and make changes to the ISM parameters, if you need to.
Note: The ISM parameters displayed on the terminal screen are the
default settings connected with the feature set selection. If you do not
change the feature set, the parameters displayed remain as the
current ISM parameters. You can accept these settings without
changes or you can change the settings to meet the requirements of
the system.
April 2000