Nortel Meridian 1 Option 11C Upgrade Manual page 50
Hide thumbs
Also See for Meridian 1 Option 11C:
- Planning and installation manual (410 pages) ,
- Manual (128 pages) ,
- Expansion manuallines (74 pages)
Table of Contents
Advertisement
Page 50 of 224
Upgrade a two-cabinet system with metal cable to Option 11C
553-3021-250
Standard 7.00
Figure 12
Cable Routing Guide
Mounting Screws
Cable Routing Guide
10
Remove the NTAK01 CPU/Conf or NTBK45 System Core card
from the cabinet.
11
Set the baud rate switches on the new NTDK20 SSC card to match
the settings on one of the following:
— the NTAK01 CPU/Conf
— the removed NTBK45 System Core card
12
Install the Software Daughterboard and the Security Device on
the NTDK20 SSC Card, as shown in Figure 13 on page 51.
The NTDK20 SSC card has components on both sides of the circuit
board. Be careful not to damage any of the components when handling
the card.
April 2000
CAUTION
Advertisement
Table of Contents
