Nortel Meridian 1 Option 11C Upgrade Manual page 105

Upgrade an Option 11E with fiber-optic cable to Option 11C
Label and connect the cables as shown in Table 4
Table 4
Labeled cable connections — Cabinet 2 assigned as Cabinet 3
Current label
on cable
J21
J22
J23
J24
J25
J26
J27
J28
J29
J30
32 Put on the antistatic wrist strap located in the expansion cabinet.
33 Locate the fiber receiver card.
— Is the expansion cabinet within 10 m (33 ft) of the main cabinet
and connected with NTBK78 (A0618443 or A0632902) plastic
fiber-optic cable? If so, use an NTDK23 Fiber Receiver card.
— Do you want to move up to 3 km (1.8 mi) from the main cabinet?
If so, use an NTDK25 (Multimode) or NTDK89 (Single Mode)
Fiber Receiver card.
Expansion Cabinet 2
assigned as Cabinet 3
Connect to
connector
J1
J2
J3
J4
J5
J6
J7
J8
J9
J10
Option 11C and 11C Mini
Page 105 of 224
New label on
cable
J31
J32
J33
J34
J35
J36
J37
J38
J39
J40
Upgrade Procedures Guide