Nortel Meridian 1 Option 11C Upgrade Manual page 174
Hide thumbs
Also See for Meridian 1 Option 11C:
- Planning and installation manual (410 pages) ,
- Manual (128 pages) ,
- Expansion manuallines (74 pages)
Table of Contents
Advertisement
Page 174 of 224
553-3021-250
Standard 7.00
Upgrade Option 11C/11C Mini software to a new release
Procedure 19
Upgrade the software using a PCMCIA card
Note: For Option 11C systems, this procedure requires that the
NTDK81 or NTTK13 Software Daughterboard be on the SSC card. To
check that you have installed the NTDK81 or NTTK13, see
Procedure 18 on page 170.
1
Perform a data dump (EDD).
a
Load overlay program 43 (LD 43 or 143).
b
Enter command EDD.
2
Disable all DCHs using LD 60.
3
Disable any AML links using LD 48.
4
Insert the Software Delivery card in slot A in the PCMCIA socket.
Locate the PCMCIA socket in the faceplate of the Option 11C
NTDK20 SSC or the Option 11C Mini NTDK97 MSC card.
See Figure 61 on page 171 for the correct position.
Note: Carefully press on the PCMCIA card until it seats tightly.
April 2000
Advertisement
Table of Contents
