Update The Boot Code - Nortel Meridian 1 Option 11C Upgrade Manual

Page 216 of 224

Update the boot code

553-3021-250 Standard 7.00
Use the flash boot ROM utility
If you see a display like Example 4, return to Step 5 on page 213.
7 Perform or terminate Flash Boot ROM upgrade.
The following message displays:
Upgrading Active Boot ROM to NTDK34AA REL 03
System Restart required to activate Flash Boot ROM upgrade.
*** WARNING *** A system restart will be invoked as part of the Flash Boot
ROM Upgrade.
The system prompts you to perform the Flash Boot ROM upgrade.
— If you respond no, go to Step 3 on page 212.
— If you respond yes, the procedure is at an end.
8 Perform or terminate Flash Boot ROM restore.
The following message displays:
Restoring Flash Boot ROM to NTDK34AA REL 01
System Restart required to activate restored Flash Boot ROM.
*** WARNING *** A system restart will be invoked as part of the Flash Boot
ROM Restore.
The system prompts you to perform the Flash Boot ROM Restore.
— If you respond yes, the procedure is at an end.
— If you respond no, go to Step 3 on page 212.
—————————— End of Procedure ——————————
This section describes how to upgrade the boot code to support the
Option 11C NTDK81 or NTTK13 Software Daughterboards, or the Option
11C Mini NTDK97 Mini System Controller (MSC) card.
The boot code on the existing Option 11C SSC card must be NTDK34AA
Release 09 or later to support the NTDK81 or NTTK13 Flash
Daughterboards.
The minimum release of boot code for the Option 11C Mini MSC card is
NTDK34FA Release 03. NTDK34FA Release 03 also supports the NTDK21,
NTDK81, and NTTK13 Flash Daughterboards on the SSC card.
April 2000