Option 11/11E upgrade from Software Daughterboard or PCMCIA
c
27
Complete the software installation.
Example screen display:
Are you sure you wish to perform the installation?
Do one of the following:
— Enter y <CR> (yes). The Software Installation Program finishes.
— Enter n <CR> (no) and go to Step 8 on page 150.
— Enter a <CR> (abort, return to Main Menu).
—————————— End of Procedure ——————————
Do one of the following:
• If the successful message appears, go to Step 27 on page
163.
• If the unsuccessful message appears, repeat this step,
Step 26 on page 162.
After three unsuccessful keycode validation attempts, the
following message appears:
Keycode validation unsuccessful.
Installation aborted...returning to main menu.
Option 11C and 11C Mini
Page 163 of 224
Upgrade Procedures Guide